Catalinbread Talisman

30

Effect Pedal for Electric Guitar

  • Reverb
  • Authentic plate reverb emulation
  • Based on the legendary EMT 140 record reverberator
  • Controls: High pass, time, pre delay, mix and volume
  • Power consumption: 62 mA
  • Power supply via 9-18 V DC power supply unit (coaxial connection - negative polarity, not included - suitable power supply unit: Article number 409939)
  • Made in USA
Tillgänglig sedan November 2015
Artikelnummer 374142
försäljningsenhet 1 Styck
Analog No
Battery Operation No
PSU included Yes
input/output configuration Mono in / mono out
2 899 kr
Alla priser inklusive moms
i lager
i lager

Produkten finns i lager och kan levereras omgående.

Information om leveransen
Gratis frakt. Beräknad leverans mellan Onsdag, 8.05. och Fredag, 10.05.
1

30 Kundbetyg

4.7 / 5

Du måste vara inloggad för att kunna betygsätta en produkt.

Obs! För att undvika att betygsättningen är byggt på rykten eller smygreklam kan bara kunder som har köpt produkten från oss sätta sitt betyg.

Efter inloggningen i kundcentret kan du se vilka produkter som kan betygsättas.

drift

funktioner

ljud

hantverkskvalitet

23 Recensioner

A
Favorit
Anonym 23.12.2015
Fördelar: Det mest realistiska plate-reverb jag hört hittills i pedalform och min favorit bland reverb hittills. (Jag är reverb-nörd och hr provat åtskilliga). Effekten är intimt "blandad" med originalljudet och upplevs inte ligga utanpå. Ger ett stort gitarrljud även då mindre effekt används.

Nackdelar: Endast en reverb-typ: Plate.
funktioner
ljud
hantverkskvalitet
drift
2
0
Anmäl recension

Anmäl recension

google translate gb
Tyvärr uppstod ett fel. försök igen senare.
v
My favorite plate reverb pedal with tasty preamp
vladg 05.06.2017
First of all, the reverb sound reminds me UAD EMT 140 and the audio quality is competitive with Strymon pedals. Usually plate reverbs are for vocals but this pedal works great both for clean and overdriven guitar sounds adding short invisible room like tones or bathroom like wall of sound in extremes. ?Time? knob controls the length of reverb tail. ?Pre-delay? allows you to use this reverb as slapback echo when reverb time set to short. ?Mix? knob sets the level of reverb sound without affecting dry signal level, which I like a lot. ?High pass? allows you to balance reverb sound between invisible or bathroom like. I usually set it at 3 o?clock for ?invisible? side.

This pedal has coloring preamp circuit, which affects both wet and dry signal. You can use this pedal as very cool boost pedal (without any reverb) if you set ?Vol? to maximum and ?Mix? to zero! Also the preamp sound depends on input voltage! Try 9, 12, 15 and 18 volts. My favorite is 12 volts, it gives the most neutral coloration.

The pedal has internal switch to change bypass in ?soft? mode (default) or in ?true bypass? mode. Unfortunately in ?soft? mode reverb signal is leaked into the output even if mix control set to zero and also I had nasty feedbacks in extreme positions so I switched it to ?true bypass?. Besides this the pedal operates flawlessly already for several months and earned its place on my Pedaltrain Nano pedalboard. It can be used as reverb, slapback delay and booster preamp pedal.

The reverb implementation is digital of course but probably due to preamp circuit the pedal sounds very smooth and analog.
funktioner
ljud
hantverkskvalitet
drift
6
0
Anmäl recension

Anmäl recension

google translate gb
Tyvärr uppstod ett fel. försök igen senare.
S
The reverb of the 60s/70s records - bright and texture to your tone!
Symploke_ 21.04.2020
I mainly use it to get the Tony Iommi sound in his first Black Sabbath albums. It adds to my P90 pickups the exact amount of bright and texture for that big and gorgeous tone.
It works from 9 to 18 volts and includes a internal switch to be true bypass or buffered. The pedal includes a boost circuit, so it can be used like a little booster and buffer pedal.
Other nice features are a high pass filter (high pass pot), pre-delay and mixer for dry and reverb signals.
The buffered mode allows an unchanged infinite reverb (quite ambient/dream) setting the time pot to max when switching off with the foot switcher.
Ah, obviously, it's a digital delay.
funktioner
ljud
hantverkskvalitet
drift
2
0
Anmäl recension

Anmäl recension

google translate gb
Tyvärr uppstod ett fel. försök igen senare.
Jb
Great pedal
Johnny b Fly 31.10.2021
This pedal has a very vintage and warm reverb, a wonderful and very pleasant (nothing harsh) and-chain effect that will help any player to better accommodate the feel to que song! Great plate reverb emulator! Nice manual - very practical and explicative. The controls are very intuitive and easy to operate. Size is pedalboard friendly, light, but very well constructed. Nevertheless, considering other Catalinbread pedals, this one could have a better painting. Overall? Great pedal!!
funktioner
ljud
hantverkskvalitet
drift
0
0
Anmäl recension

Anmäl recension

Passande från YouTube